Refitting an Armattan Marmotte frame with Walksnail Avatar
My experience of converting an Armattan Marmotte analog VTX to Walksnail Avatar digital VTX system
🇨🇭 Freestyle FPV drone flying in Switzerland
My experience of converting an Armattan Marmotte analog VTX to Walksnail Avatar digital VTX system
The Armattan Gecko 3″ frame has a 20 x 20 mm mounting pattern, and the Runcam Split S 4 has a 25.5 x 25.5 mm mounting pattern, so by default they don’t fit.
Operational: November 2020 – May 2022 I lost my Cragon 5″ drone in the mountains, so I wanted my new 5″ drone to be reliable for operation. No jello for… Read more »
Time for a new drone build … enter the Hornet build, based upon the Armattan Gecko 3″ frame. Capable of running on 4S LIPOs but supporting a RunCam Split 4 4K instead of a GoPro.
Operational: October 2020 – active The design brief for this drone is a drone that is reasonably light-weight, quiet and fun for practising with, yet still supporting the XT60 4S… Read more »
Operational: September 2018 – September 2020 (death by loss in the mountains) There were two iterations of the Cragon. Cloud … Dragon … Cragon .. well, that was the reason… Read more »
Operational: August 2018 – August 2018 (death by drowning in a river) Cloud … Dragon … Cragon .. well, that was the reason for the name. Check out the Cragon… Read more »
Operational: April 2019 – active GoldPaw … named due to the gold bling motors. I wanted to build a new drone to improve upon some aesthetic and functional design issues… Read more »
Winter months … time to enhance parts of the drone. I’ve integrated a MMCX holder and GPS holder into one, making the rear of the drone a little more attractive…. Read more »
3D printing time … I upgraded to a TBS Triumph Pro MMCX antenna connector after snapping off my old SMA antenna. To stop the antenna flying around, I built a… Read more »